Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 11, 2017 15:59:00 GMT
My Cadence sensor stopped working a few weeks ago and I thought maybe it's because the battery has run out. I've had this for about 18 months. Not sure how long they are suppose to last... I'm struggling to get the battery out... any tips?  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 11, 2017 16:30:20 GMT
Looking at the picture your battery appears to be stuck in the lid. My suggestion is get a flathead screwdriver or your best kitchen knife and gently separate it from the plastic lid. It's not glued probably just a little bit stuck. 18months is a reasonable lifetime. Replacement is a CR2032. Good luck!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 11, 2017 16:51:53 GMT
All done. Thanks Chris. I even had the right spare at home  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 16, 2017 11:04:34 GMT
hi Nancy, i saw the post name and thought you were going to say you were having the same problem as me, which was my cadence sensor keeps telling me the battery is low, despite changing battery 3 times! i fixed it by having my bike stolen  also, a strong magnet will do the trick and avoids damaging the innards or the battery with knife/screwdriver etc. |
|
