Post by Yves Berger on Jul 10, 2019 22:11:47 GMT
photos.app.goo.gl/iBfUhr9dRiXxS7wEA
Had to issues on ebay with chaps not paying .... so back here / Priced to go! £280 for the set
Due to a new build-up where i had to upgrade from BB30 to GXP I am selling the following:
Sram Red 172.5mm crankset BB30 (w/ bolt but NO chainrings), one bigger mark on the inside of the drive side - not sure how it did happened
Stages power meter G3 L w/ spindle A (Sram Red 22 etap) 172.5 (bought late 2017)
110 BCD
All in good working order, still have box and bits. Some cosmetic marks on both cranks
See pictures
Pick-up in tooting / City
Thanks!
Actual description from Stages website:
This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is.
Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.
Additional features:
± 1.5 % accuracy in all conditions
Active temperature compensation
Accelerometer based cadence measurement
Wirelessly upgradable firmware
LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
Updated accelerometer and addition of gyroscope for improved cadence resolution
Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Accuracy: ± 1.5%
Power meter housing: low profile design, with robust door interface
Weight: Only adds 15g to base crank arm
Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter
Power range (Watts): 0 to 5000
Cadence range (rpm): 10-220
Water resistance rating: IPX7
Had to issues on ebay with chaps not paying .... so back here / Priced to go! £280 for the set
Due to a new build-up where i had to upgrade from BB30 to GXP I am selling the following:
Sram Red 172.5mm crankset BB30 (w/ bolt but NO chainrings), one bigger mark on the inside of the drive side - not sure how it did happened
Stages power meter G3 L w/ spindle A (Sram Red 22 etap) 172.5 (bought late 2017)
110 BCD
All in good working order, still have box and bits. Some cosmetic marks on both cranks
See pictures
Pick-up in tooting / City
Thanks!
Actual description from Stages website:
This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is.
Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.
Additional features:
± 1.5 % accuracy in all conditions
Active temperature compensation
Accelerometer based cadence measurement
Wirelessly upgradable firmware
LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
Updated accelerometer and addition of gyroscope for improved cadence resolution
Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Accuracy: ± 1.5%
Power meter housing: low profile design, with robust door interface
Weight: Only adds 15g to base crank arm
Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter
Power range (Watts): 0 to 5000
Cadence range (rpm): 10-220
Water resistance rating: IPX7